Concrete Resurfacing in Western Suburbs
Design-sensitive work where the finish has to answer to the architecture.
In short
In the western suburbs - Floreat, City Beach, Claremont, Cottesloe, Nedlands, Dalkeith and Mosman Park - our work is colour-matched to the architecture. Limestone, render and dark glazing set the palette, and the paving is designed to sit quietly inside it rather than compete with it.
- Most requested
- Entry statements, driveways, pool surrounds
- Design process
- On-site samples against wall, roof and glazing tones
- Finish
- Matte or satin seal, low-contrast joints, large formats
- Coastal maintenance
- Re-seal every 2 to 4 years this close to the coast.
Western-suburbs jobs are usually the most design-sensitive we do. The house has a considered palette, often limestone, render and dark glazing, and the paving needs to disappear into it.
We spend more time sampling here than anywhere else - tone against the boundary wall, joint colour against the roof, pattern scale against the frontage width.
Restraint wins: low-contrast joints, large formats, and a matte or satin seal rather than high gloss.
Sampling before committing
We spend more time on colour here than anywhere else in Perth. Tone is checked against the boundary wall, joint colour against the roof, and pattern scale against the width of the frontage - in daylight, on site, not from a brochure.
Restraint almost always wins: large formats, low-contrast joints and a matte or satin seal instead of high gloss.
- Limestone, bone and pale grey bases for rendered and stone homes
- Charcoal for dark-glazed contemporary frontages
- Joint colour within two shades of the base for a monolithic look
Coastal exposure on the western fringe
City Beach, Cottesloe and Swanbourne carry the same salt load as the northern beaches. The design can be as refined as you like, but the sealer specification and re-seal interval need to acknowledge where the house sits.
What we do most in Western Suburbs
- Architect-matched colour
- Entry statements
- Large-format patterns
Services available in Western Suburbs
- Spray-On Concrete - A polymer-modified cement overlay sprayed over existing concrete, then patterned and sealed to look like laid stone or brick.
- Epoxy Floor Coatings - Epoxy for garages, workshops and commercial floors - flake, plain or metallic, finished with a clear topcoat.
- StreetBond - Pavement coatings for asphalt and concrete in water-based and acrylic - used for crossings, bus stops, plazas and university areas.
- Vuba & Resin Driveways - Resin-bound stone driveways and paths - natural aggregate bound in clear resin for a smooth, permeable, seamless surface.
Recent finishes
Systems and finishes we use in Western Suburbs.
Questions we get from Western Suburbs
- Can you match paving to a specific limestone or render colour?
- Yes. We prepare on-site samples against the actual wall and roof before the job is booked, so the tone is approved in daylight rather than from a chart.
- Will spray-on paving look cheap on a high-end home?
- It depends entirely on format and joint contrast. Large-format patterns with low-contrast joints and a matte seal read as stone; small high-contrast brick patterns do not suit most contemporary western-suburbs frontages.
- Do you work with builders and landscape designers?
- Regularly. We can work to a specified colour, joint layout and finish sheen and coordinate our stage with the wider build program.
- What sheen level do you recommend?
- Matte or satin for most western-suburbs work. Gloss shows every footprint and water mark and dates quickly outdoors.
Send us a photo. We'll tell you what your concrete needs.
Free measured quotes across Perth metro and surrounds - driveways, pool surrounds, alfrescos, paths and courtyards.
Robert Baumgarten · Perth, WA · enquires.spraypaveperth@gmail.com